Additional Images

Icon Stage 2 1.75''-4" 2.0 VS Front Coilover Conversion System for Jeep Wrangler JK with CDCV Valves

K25022

 

• Fits 2007 - Current Jeep JK Models

• Lift heights are based on 4 door models, lighter 2 Door Models or heavily assessorized vehicles will vary

• Adjusting kit over 3” will require an adjustable track bar and aftermarket link arms (see options below)

• Lift heights are based on 4 door models, lighter 2 Door Models or heavily assessorized vehicles will vary

• High clearance steering ok with proper bumpstop installed (not included)• 2012+ models require exhaust extension kit (Part #22011) for proper front driveline clearance

• No driveline modifications necessary if kit is installed as intended (with or without track bars)

• Compatible with ICON front hydraulic bump stop system (Part #22019)

• Front End Alignment Recommended

Pricing: $2,477.84
Qty:

Description

Available as an industry first is the ICON Jeep JK 1.75 – 4” bolt-on and returnable to stock front coilover conversion system w/CDCV. This system not only offers superior ride quality and performance, but gives you the option to adjust ride height and compression valving based on how your vehicle is equipped. Included in this front system is fabricated coilover upper & lower mounts, 2.0 V.S. Series remote reservoir coilovers w/CDCV, and necessary hardware for proper installation. This ICON system was designed from the ground up for improved suspension handling off road, increased wheel travel over stock, and the best ride quality on the market. ICON 2.0 V.S. Series shocks include FK bearings, billet top cap & rod ends, 7/8" shafts, all while increasing the duration of consistent damping over stock regardless of situation. Adjustable ride height, compression damping tuneability with the turn of an external knob, and secondary spring rate engagement adjustability by the end user makes this kit highly tunable to your personal liking by all skill levels. The ICON JK hydraulic bumpstop kit (22019) is also an option that can be installed with the coilover conversion kit adding wheel control for high speed traversing.

Key Features:

• 100% Returnable to stock

• Adjustable ride height

• Adjustable secondary spring rate engagement

• Increased wheel travel over stock

• Vehicle specific tuned shocks w/CDCV to easily adjust compression damping

• Shock geometry improves stability

• Sheet metal front shock mount for maximum clearance & clean look

• Made in the USA

• Lifetime guarantee that coil springs won’t sag

Tech Info:

• Fits 2007 - Current Jeep JK Models

• Lift heights are based on 4 door models, lighter 2 Door Models or heavily assessorized vehicles will vary

• Adjusting kit over 3” will require an adjustable track bar and aftermarket link arms (see options below)

• Lift heights are based on 4 door models, lighter 2 Door Models or heavily assessorized vehicles will vary

• High clearance steering ok with proper bumpstop installed (not included)• 2012+ models require exhaust extension kit (Part #22011) for proper front driveline clearance

• No driveline modifications necessary if kit is installed as intended (with or without track bars)

• Compatible with ICON front hydraulic bump stop system (Part #22019)

• Front End Alignment Recommended

Wheel & Tire Fitment Info:

OEM Wheels & Tires:    Yes

Aftermarket Wheels:    4.5" Backspace

(wheel spacers required to run factory wheels with an oversized tire)

Aftermarket Tires:     33” Tall tires

(35" tire packages require aftermarket high clearance fenders & minor modifications, test fitment recommended)

System Components Included:

22003      Front coilover upper & lower mounts

28006C    ICON 2.0 V.S. Series front dual rate coilover shocks with reservoir and CDCV

Application List

2007-2016 Jeep Wrangler JK and JKU

Specs

Lift Height: 1.75"-4"''

Shipping Information

  • Item Requires Shipping
  • 110.0 lbs.
  • W48.0000” x H24.0000” x L40.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.