Laser cut brackets weld to frame and include grade 8 hardware. Developed to relocate front spring hangers for leaf spring conversions. Designed to use 2.5" aftermarket leaf springs. Grinding and welding are necessary to install.

Defender Racks Are Made From 16-Gauge, Fully Welded, 1" Round Steel Tubing And Finished In A Textured Black Powder Coat. Aerodynamic Styling Blends Well With Today'S Vehicle Designs. Welded Light Tabs (4 Front & 2 Rear) And Integrated Flooring Maximizes Functionality. Multiple Mounting Options ...

Smittybilt Bronco Pinch Weld Delete Plates are a perfect solution to cover the unslightly pinch weld area on your Bronco while also protecting them and providing your vehicle a sleek clean look. Our light black textured finish provides durability and protection against all elements. Smittybilt's Br

Smittybilt Bronco Pinch Weld Delete Plates are a perfect solution to cover the unslightly pinch weld area on your Bronco while also protecting them and providing your vehicle a sleek clean look. Our light black textured finish provides durability and protection against all elements. Smittybilt's Br

By far the easiest way to mount your Manual Jack. Our Weld-on chassis mounts are made of interlocking 4130 tabs and tubes to take the guess work out of assembly. Light weight and simple, the lower mount come ready to install on 1.5 inch tubing. (Lower mount has guide marks to sand out to 1.75 ...

The idler pivot is what the idler arm mounts to and pivots about, and the OEM idler pivot has issues with bending the shaft and also bending the tabs on the frame that locate the idler pivot. When these issues happen, the passenger side of the drag link ends up higher in the frame, creating an ...

4130 chromoly frame truss mounts between rear lower a-arm pivots to prevent frame spread from the weight of the motor during harsh bottom outs. Welding is required for installation. ...

Synergy Jeep JK rear axle truss designed to strengthen the factory rear axle housing. CNC formed design significantly reduces installation time compared to multi-piece designs and is compatible with all Synergy rear track bar relocation brackets. Recommended to be used in conjunction with 8012-15 ...

Prevent your factory lower control arm tabs from ovaling or even tearing with our lower arm weld washers. They are laser cut from 1/8" chromoly and follow the contour of the factory tabs for a perfect fit. This kit includes enough weld washers for both lower arms. Includes (8) Chromoly weld washers

Increase rear suspension dampening control and reduce harsh bottom outs with added weight packed in the rear of the SUV. CNC laser cut brackets weld to the outer frame rail and offer easy access to adjust the nitrogen pressure. Designed to work with KING 2.0" compact threaded adjustable bump s

Trail Gear Weld Washers. Over time, bolts on steering and suspension components tend to wallow out the bolt holes on their respective brackets. It is important to strengthen these brackets to ensure that failure does not occur. Our TG Weld Washers were made with that purpose in mind. Our TG Weld ...

Body Mount Plates Weld ...

The new Broncos are known to have a visibly unfinished pinch weld on those models not running factory or aftermarket sliders. We?ve designed a powder coated steel cover to clean up and finish out the look of the bottom edge of the body. Adding a unique touch, the Bronco?s body color shows through t

The idler pivot is what the idler arm mounts to and pivots about, and the OEM idler pivot has issues with bending the shaft and also bending the tabs on the frame that locate the idler pivot. When these issues happen, the passenger side of the drag link ends up higher in the frame, creating an ...

Synergy Jeep JK Weld-On Rear Track Bar Bracket to replace the thin and weak factory bracketFits:07-18 Jeep Wrangler JK07-18 Jeep Wrangler Unlimited JKDetails:Synergy JK Weld-On Rear Track-Bar BracketWeld-On rear track-bar bracket designed to replace the weak factory JK track bar bracketReplace the ...

Synergy Jeep JK HD Weld-On Front Track Bar Bracket For 2.5 Inch Axle TubeDetails:Fits 07-18 Jeep Wrangler JK and Jeep Wrangler Unlimited JKCompatible with all lift heights, bracket can be trimmed for track bar bracket heights from stock, 1 Inch 2 inch +3 inch over stock heightWeld on design for ...

The Large Weld-On Zip Tie Tabs are made out of 12 GA (formed tab) and 1/8 inch thick (flat tab) SAE 1008 Steel. These are great to add a zip tie mounting point to any location. Made from steel, you can easily weld these onto your vehicle. The Large Weld-On Zip Tie Tabs are sized for up to 1/2 inch

The Large Weld-On Zip Tie Tabs are made out of 12 GA (formed tab) and 1/8 inch thick (flat tab) SAE 1008 Steel. These are great to add a zip tie mounting point to any location. Made from steel, you can easily weld these onto your vehicle. The Large Weld-On Zip Tie Tabs are sized for up to 1/2 inch

Banks precision made high-quality NPT weld-on bungs. Whether you are adding pressure/temperature sensors to your engine, injection nozzles, an EGT to your exhaust (or anything for that matter), these weld-in bungs are exactly what you need. Build out your custom system to fit your needs. Thread: 1/

Banks precision made high-quality NPT weld-on bungs. Whether you are adding pressure/temperature sensors to your engine, injection nozzles, an EGT to your exhaust (or anything for that matter), these weld-in bungs are exactly what you need. Build out your custom system to fit your needs. Thread: 1/

Banks precision made high-quality NPT weld-on bungs. Whether you are adding pressure/temperature sensors to your engine, injection nozzles, an EGT to your exhaust (or anything for that matter), these weld-in bungs are exactly what you need. Build out your custom system to fit your needs. Thread: 3/

Banks precision made high-quality NPT weld-on bungs. Whether you are adding pressure/temperature sensors to your engine, injection nozzles, an EGT to your exhaust (or anything for that matter), these weld-in bungs are exactly what you need. Build out your custom system to fit your needs. Thread: 3/

The new Broncos are known to have a visibly unfinished pinch weld on those models not running factory or aftermarket sliders. We've designed a powder coated steel cover to clean up and finish out the look of the bottom edge of the body. Adding a unique touch, the Bronco's body color shows through t

Weld On Extended Sway Bar Mount Features Attaches directly to front axle housing Bare metal Heavy gauge steel Includes gusset Relocation tab raises swaybar mount 2.0 in. on axle ...

Small, low profile weld on Jack Point mounts to your suspension or chassis and provides a mechanical connection between the Jack and vehicle, ensuring your car will never fall off the Jack. Note: Weld-on Jack Point sold as single units.

Westin XTS Pinch Weld Covers ...

Westin XTS Pinch Weld Covers ...

Limiting Strap Clevis Kit. Looking for an easy way to mount your limit straps? Trail Gear is now offering a Clevis Kit for your limiting straps in both a single and multiple strap configurations. There is no other Limiting Strap Clevis Kit on the market that compares. This is the only Grade 8 ...

The Carli Universal 12" Limit Strap Kit is designed to fit a wide range of vehicles and is included with Radius Arm kits. 12" limit strap kit with universal frame clevis. ...

The Carli Universal 15" Limit Strap Kit is designed to fit a wide range of vehicles and is included with Radius Arm kits. 15" limit strap kit with universal frame clevis. ...

OE style with 15 degree bends on the ends for a sleek look. Slip resistant step pads provide a large and safe step surface. Bolt-on installation with vehicle-specific mounting brackets that are included. Polished stainless steel finish with a Limited Lifetime Warranty. ...

OE style with 15 degree bends on the ends for a sleek look. Slip resistant step pads provide a large and safe step surface. Bolt-on installation with vehicle-specific mounting brackets that are included. Polished stainless steel finish with a Limited Lifetime Warranty. ...