Raceline WheelsRaceline Wheels
6 Spline Key Car (L3800)
6 Spline Key ...
Part No: L3800
7 Spline Key ...
Part No: L3800L
Optional lifting tooth accessory for the El Gato EG-1 hydraulic high-lift recovery jack. The extended reach provides alternate lifting capabilities compared to the standard lifting tooth, making it easy to access those hard to reach areas. Constructed from high-quality aluminum and anodized in a semi-gloss black finish. A HD rubber coating protects the lifting surface (and vehicle) from scrapes, ...
Part No: XG-RJ50020B
Replacement pump for the 2 ton jack. Will work on both the standard and big wheel 2 ton jacks. This pump is designed by Pro Eagle to perform better in off road conditions and only fits in our jack made to perform better in off road conditions. This will NOT fit any other brand. Pro Eagle is the only floor jack manufacturer that offers parts or service to our customers after the initial sale. ...
Part No: ORJRP2
This is the same style handle that comes on all of 2 and 3 ton jacks. All big wheel jacks already come with a handle. Add this to an older Pro Eagle or other brand jack. Fits: 2 TON OFF ROAD JACK 2 TON BIG WHEEL OFF ROAD JACK 3 TON BIG WHEEL OFF ROAD Does not fit the ...
Part No: ORJ23GH
TURN YOUR PRO EAGLE JACK INTO A JACK STAND WITH THIS USER FRIENDLY TOOL. EXTENDS INTO PLACE WITH THE PUSH OF A LEVER, LOCKING YOUR JACK AT THE HEIGHT YOU NEED UNTIL IT IS REMOVED. HOLDS EVEN IF HYDRAULIC PRESSURE IS RELEASED ACCIDENTALLY, AND WHEN YOU ARE DONE, IT'S SMALL ENOUGH TO STORE IN A DRAWER OR GLOVE BOX. NOT SOMETHING YOU CAN DO WITH A SPACE HOGGING JACK STAND. DESIGNED TO WORK WITH ALL ...
Part No: JL35
This Stainless Steel roll bar mount is designed specifically for our  Phoenix Co2 Air Jack. It comes complete with 4 clamps to attach the jack to the mount and the mount to the roll bar. The jack is released with the pull of one pin that fits tightly to limit rattling. The pin is attached to the mount with a leash to keep it from getting lost in the dirt. Also included is a holster for Co2 ...
Part No: AJQRM
Easily lift the vehicle directly from the wheel using this accessory for Go Rhino's El Gato EG-1 hydraulic high-lift jack. Perfect for those situations where lifting from the vehicle's chassis is not an option. This wheel hook is constructed from high-strength steel and features a non-slip HD rubber coating to protect your vehicle's wheels from being scuffed or scraped. Triple reinforced Nylon ...
Part No: XG-RJ50030B
Replacement pump for the 1.5 ton jack. Photo does not represent the 1.5 ton pump. Check the video  below to see how is the install process: Fixing my broken Pro Eagle ...
Part No: ORJRP1.5
Protect your jack from the elements with our Pro Eagle fitted cover. This was made to fit the 2 Ton Beast and 3 Ton Kratos jacks. It features an elastic band that will hold it tight and secure. It will fit over the standard jack but it will be a little loose and will need to be secured if stored in the bed of a vehicle in the wind. This does not fit the 1.5 Ton jack. For 1.5 Ton jack mount ...
Part No: ORJC
This is a 4" round flat top that replaces the U shaped top that the Phoenix Co2 Air Jack is supplied with. Will not fit the Phoenix DS. Fits: Phoenix Co2 Air ...
Part No: AJRT4
Will fit 1.5 Ton, 2 and 3 ton off road jacks andthe 3 ton shop jack. (Sold as a single wheel, NOT a pair) High impact composite wheels with ball bearings. -Non pnematic: Never worry about flat tires. -Sealed ball bearings: Designed to keep dust and dirt out. -Off Road tread: Made for rolling over off road terrain. Fits: 1.5 TON BIG WHEEL OFF ROAD JACK (Rear) 3 TON SHOP JACK ...
Part No: ORJW6
Will fit 2 and 3 ton Big Wheel Jacks. (Sold as a single wheel, NOT a pair) High impact composite wheels with ball bearings. -Non pnematic: Never worry about flat tires. -Includes sealed ball bearings: Designed to keep dust and dirt out. -Off Road tread: Made for rolling over off road terrain. Fits: 2 TON BIG WHEEL OFF ROAD JACK 3 TON BIG WHEEL OFF ...
Part No: ORJW8
This is a larger base for use on soft ground. The Phoenix Co2 Air Jack sits and locks into this base to add stability when the ground is soft and a larger footprint is needed. It is stainless steel and will store into the carry case provided with the jack when not in use. Attached leash makes it easier to pick up if pushed into sand or mud. Fits: Phoenix Co2 Air Jack Phoenix DS Co2 Air ...
Part No: AJBM
This is a four pack of 25 gram Co2 Cartridges. Fits: Phoenix Co2 Air Jack Phoenix DS Co2 Air ...
Part No: AJCO25
This is a three pack of 33 gram Co2 Cartridges. Fits: Phoenix Co2 Air Jack Phoenix DS Co2 Air ...
Part No: AJCO33
Please note this is a replacement handle for Pro Eagle jacks and most likely will NOT fit any other brand jack. Please select if you are replacing the handle on a Pro Eagle 1.5 ton or 2 / 3 ton jack. The 2 & 3 ton handle is 1 3/8" diameter. We will not return or refund this product. ...
Easily move your trailers around using your Pro Eagle jack. This hitch ball attaches just like our extensions so that it is secure and will not fall off the jack. The 2' ball will fit trailers with 2" or larger receivers. This is not for towing and will ONLY fit Pro Eagle jacks: 1.5 TON OFF ROAD JACK 2 TON OFF ROAD JACK 2 TON BIG WHEEL OFF ROAD JACK 3 TON BIG WHEEL OFF ...
Part No: JHB
The Phoenix DS sports a lower 8.5 inch retracted height   allowing it to be utilized in more varied situations. The telescopic design provides 17" of lift height. The lower starting height makes the DS easier to slide under a vehicle with a flat tire. It also increases the amount of lift points on the vehicle, especially in uneven terrain. Most commonly a flat tire won’t ...
Part No: AJDSX1B
This Polyurethane jack pad snaps in place and will not fall out. It protects the mating surface between the jack and extension, preventing damage while not using the extension. The material will grip and form to surfaces better giving a more secure experience. Pad will NOT fit other brand jacks and will not fit on Pro Eagle jacks 2 years old or older. (2018 or older) The pad snaps into the plate ...
Part No: POLYPAD
As good as our jack is, it is still only half of what is needed to change a tire. What about tools? Tool kits can get expensive and especially if you only need 1 socket but tool companies make you purchase a whole set. We spoke to our friends at  Boxo Tools  and together we created a tool kit made specifically to fit in our jack mounts. This kit stores neatly in our 2.0 version mounts ...
The heavy-duty JL: Hi-Lift Jack Mount Bracket provides a safe, quiet, and secure mounting point for a Hi-Lift Jack. The 3/16 inch-thick laser cut and powder coated bracket bolts to the Alpha HD Hinged Spare Tire Carrier for unshakable stability. This bracket also incorporates a built-in CB antenna mount as well as an off-road flag mount for those sand dune trips. The Alpha RotopaX Mount Kit ...