|
Replacement Sector Shaft Stud for Synergy 94-08 4x4 Dodge Steering Box BracesFits:8557-04, ... Part No: 855702-A-PL |
Rock Assault Double-Ended Ram and Clevis Kit with 2.5 Inch Bore by 1.375 Inch Rod This is the ram you have been looking for if you are building a rig for off-road racing or rock crawling competitions and need extra steering force for the largest tires. Our Rock Assault Heavy-Duty Double-Ended Ram has a one-piece 1.375 Inch diameter 4340 chromoly steel rod that is more resistant to bending under ... Part No: 304647-KIT |
Hydro Assist Brackets. Our mounting brackets have a 0.625 Inch bolt hole. The Hydro Assist Brackets are designed to fit a Toyota solid axle front housing and 1.25 Inch tie rod. Specs: Sold As: Kit Material: Metal Finish: Bare Color: Grey Location: Front Size: 1.5 Inch Option: OEM Axle Housing Fits: 1979-1995 Toyota Pickup, 1985-1995 Toyota ... |
Ram Assist Single-Ended Ram Rebuild Kit High-quality replacement seal kit designed specifically for our 1.5 Inch bore x 0.75 Inch rod and 2.0 Inch bore x 0.75 Inch rod single-ended rams. The Ram Assist Single-Ended Ram Rebuild Kit includes all the seals you need to service your single-ended ram. Detailed step-by-step instructions included. Does not include rod bushing or piston wear band. These ... Part No: 304201-KIT |
IFS Steering Box Mount. If you're installing crossover steering on your 1979-1985 4 wheel drive Toyota you're going to need to mount an IFS steering box.Kit includes: Inner Frame Reinforcing Plates Outer Frame Reinforcing Plates Bolts DOM tubing Crimp Nuts Details: Inner plate is 0.1875 Inch Outer plate is 0.25 Inch Angled leading and trailing edges prevent frame cracking Heavy duty design ... |
Rock Assault 3.0L V6 Power Steering Pump Kit. We all know that the stock pump on a 3.0 is just not enough to turn big tires or run a ram assist and when you try and drill out the inlet to get more volume the result is a loud pump followed by pump failure. A new Toyota stock pump puts out around 1,300 PSI at only one gallon per minute. Our Rock Assault Pumps put out 1,450 and 1,650 PSI at 4 to 4 ... |
The TeraFlex JK/JKU High Steer Knuckle Kit addresses several weaknesses prevalent in the stock axle steering configuration on JK Wrangler and JKU Wrangler Unlimited models with 4-6 inch lift kits. This kit is compatible with all factory and aftermarket axle shafts, ball joints, wheel hubs, and tie rods and does not affect operation of factory stability and traction control systems including ... |
The TeraFlex JK Hydraulic Ram Assist 1-5/8 inch (42mm) Tie Rod Clamp incorporates a 5/8 inch-18 threaded bung to easily attach a hydraulic ram assist to the TeraFlex Heavy-Duty 1-5/8 inch (42mm) tie rod without welding. Easily adjust the clamp for toe setting, differential clearance, and lock-to-lock steering position. Constructed from billet steel with a black powder coat finish. Fits: JK ... |
Toyota High Steer Crossover Steering Kit. Crossover Steering is critical for rock crawling. The stock steering just can't keep pace with today's super flexible suspension systems. This results in broken stock steering arms and loss of steering. Our high steer kit features unbeatable quality at a super low price. Flat steering arm kit requires custom mounting hardware, not included in kit. Rod ... |
Orbital Mounting Kit. Finally an easy way to mount your orbital without all the measuring and fabrication work. This kit is so simple that anyone with basic welding skills can have it fully installed in under an hour. The 3 plates that make up the kit are laser cut out of 0.1875 Inch steel, and precision machined for a perfect fit. This kit will fit most standard style orbitals used in this ... Part No: 130295-1-KIT |
8 Inch Ram and Clevis Kit. Rock Assault Double Ended Ram and Clevis Kits. Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top level rock crawling competitors and the toughest trails in the world. Based on our experience we knew exactly what we wanted in a ram, and what we didn't. Most rams on the market only ... Part No: 130282-1-KIT |
Trail-Gear's Universal Full Hydraulic Steering Kit starts with a double-ended ram and clevis kit in your choice of size - 6-inch, 8-inch, or 10-inch. In addition, the complete kit also includes: Universal Full Hydraulic Steering Kit - 10-inch Ram (1) Orbital (100ml, 125ml, or 160ml) (1) Power Flow Steering Pump (1650 psi) (1) Tie Rod Kit (1) Double Ended Ram Mounting Kit (1) Steering Column (1) ... Part No: TGI-309378 |
Trail-Gear's Universal Full Hydraulic Steering Kit starts with a double-ended ram and clevis kit in your choice of size - 6-inch, 8-inch, or 10-inch. In addition, the complete kit also includes: Universal Full Hydraulic Steering Kit - 6-inch Ram (1) Orbital (100ml, 125ml, or 160ml) (1) Power Flow Steering Pump (1650 psi) (1) Tie Rod Kit (1) Double Ended Ram Mounting Kit (1) Steering Column (1) ... Part No: TGI-309376 |
Trail-Gear's Universal Full Hydraulic Steering Kit starts with a double-ended ram and clevis kit in your choice of size - 6-inch, 8-inch, or 10-inch. In addition, the complete kit also includes: Universal Full Hydraulic Steering Kit - 8-inch Ram (1) Orbital (100ml, 125ml, or 160ml) (1) Power Flow Steering Pump (1650 psi) (1) Tie Rod Kit (1) Double Ended Ram Mounting Kit (1) Steering Column (1) ... Part No: TGI-309377 |
Trail-Gear's Universal Heavy Duty Full Hydraulic Steering Kit starts with a heavy-duty double-ended (2.5 inch bore x 1.375 inch rod) ram and clevis kit in your choice of size - 8-inch, 8.75-inch, or 10-inch. In addition, the complete kit also includes: Universal Heavy Duty Full Hydraulic Steering Kit - 10-inch HD Ram (1) Orbital (125ml or 160ml) (1) 1650 PSI Power Flow steering pump (4.5 GPM) ... Part No: TGI-309495 |
Trail-Gear's Universal Heavy Duty Full Hydraulic Steering Kit starts with a heavy-duty double-ended (2.5 inch bore x 1.375 inch rod) ram and clevis kit in your choice of size - 8-inch, 8.75-inch, or 10-inch. In addition, the complete kit also includes: Universal Heavy Duty Full Hydraulic Steering Kit - 8.75-inch HD Ram (1) Orbital (125ml or 160ml) (1) 1650 PSI Power Flow steering pump (4.5 GPM) ... Part No: TGI-309494 |
Trail-Gear's Universal Heavy Duty Full Hydraulic Steering Kit starts with a heavy-duty double-ended (2.5 inch bore x 1.375 inch rod) ram and clevis kit in your choice of size - 8-inch, 8.75-inch, or 10-inch. In addition, the complete kit also includes: Universal Heavy Duty Full Hydraulic Steering Kit - 8-inch HD Ram (1) Orbital (125ml or 160ml) (1) 1650 PSI Power Flow steering pump (4.5 GPM) (1) ... Part No: TGI-309493 |
Our universal application kit features a heavy-duty single-ended hydraulic ram in your choice of 6 inch or 8 inch stroke. Our specially designed ram features a 1-1/8 inch rod for maximum strength and a 2-1/4 inch diameter bore for maximum steering force. The mounting brackets provided have fitments made from 1/4 inch thick-formed steel. Brackets fit most applications. Our specially formed, ... Part No: TGI-309553 |
Our universal application kit features a heavy-duty single-ended hydraulic ram in your choice of 6 inch or 8 inch stroke. Our specially designed ram features a 1-1/8 inch rod for maximum strength and a 2-1/4 inch diameter bore for maximum steering force. The mounting brackets provided have fitments made from 1/4 inch thick-formed steel. Brackets fit most applications. Our specially formed, ... Part No: TGI-309554 |
