200 PSI Continuous Duty Gen 2 Onboard Air System 12V 200 PSI Compressor 25 Gal Tank

Viair

200 PSI Continuous Duty Gen. 2 Onboard Air System (12V, 200 PSI Compressor, 2.5 Gal Tank) (20002)

$628.95

Item #: 20002

Mfg Part #: VIA20002

UPC #: 818114002045

Quantity:

Out of Stock

Add to Cart

Add to Wishlist

Create a New List

true

Specifications

Item Specifications

Voltage: 12-Volt

Motor: Permanent Magnetic Motor

Duty Cycle: 100% 200 PSI

Max Working Pressure: 200 PSI

Max Amp Draw: 23-Amps

Ingress Protection Rating: IP67

Dimensions (L/W/H): 10.63 / 4.1 / 6.44

Weight: 11.1 lbs

General

Brand: Viair

Item #: 20002

Mfg Part #: VIA20002

UPC: 818114002045

MSRP: $628.95

Category

Description

VIAIR's Continuous Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 485C CE compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.

For up to 37" tires
485C Stealth Black VIAIR Compressor w/ Thermal Overload Protector
2.5 Gallon VIAIR Air Tank (200 PSI)
Digital Tire Inflation Gun with 180 PSI Gauge
30ft. Inside Braided Black Coil Hose with Quick Connects
1/4" NPT Quick Connect Stud (F)
1/4" NPT Quick Connect Coupler (F)
Dash Panel Gauge with ON/OFF Switch
Sealed Pressure Switch (165 PSI on, 200 PSI off)
Reducer 1/8" NPT (F) to 1/4" NPT (M)
Reducer 3/8" NPT (F) to 1/4" NPT (M)
1/4" NPT 250 PSI Safety Valve
1/4" NPT Drain Cock
(3) 1/4" NPT Compression Fittings

DONATE $1 TO KEEP TRAILS OPEN

Customer Reviews

Share your thoughts with other customers
Login to leave a review

Top Reviews

Good quality kit, with some minor issues

by Valued Customer on March 05, 2023

Verified Purchase

You will need (additional to this kit):1. Compressor mounting plate. 2. Heavier wire to connect compressor to relay. 3. More respectful relay. The one included has no mounting option and requires spade connections. No way to get this more weather resistant as I mounted under hood. 4) The pressure gauge/monitor (for inside truck) has a plate and 2 screws to mount. You MUST put screw holes somewhere to mount this. I found another option, search web for ""2015 2020 Ford F150 - Single Pod Pillar - OCPF-New"" and look at Ortiz website. Its pricey but if you call they might offer a coupon code. 5. I had to custom build steel brackets to mount tank underneath truck directly under rear passenger seat. The power floorboards clear the tank by around 2 inches. There is minimal room but it does fit. I used upfitter switch #2 to toggle to compressor on/off. 6. The hose used to remotely locate the intake filter is the stiffest/cheapest hose made to date. It has about zero flexibility, even after being in my house for hours. It needs to be replaced with a more flexible hose. YES, I get it, you cannot allow that hose to collapse but.....Overall kit contains very good quality items after above are considered.

Was this review helpful to you? yes no

Attachments

Wiring Diagram

Wiring Diagram Info

Return Policy

RETURNS & EXCHANGES

All returns must be accompanied by an original or copy of the receipt within 30 days. There are no refunds/credits after 30 days. Electrical items, tools, installed parts, and some special order items are non-refundable/non-returnable.

All items returned are subject to a minimum 15% restock fee unless other arrangements were made at the time of purchase.

Shipping charges will not be refunded unless item was received damaged or defective, or an error was made on our part when processing your order. Please contact us for any further questions on non-returnable items.

In order to return any products you must contact our customer service at 1-800-341-7757 and obtain an RGA number and write it large and clear on the box being returned. Also care must be taken by you the customer to pack the returned merchandise carefully so that it does not get damaged when sent back to us. Off Road Warehouse is not responsible for any damage that occurs during shipment back to us and the product will become non-returnable if it becomes damaged during the return shipment.

DAMAGED OR DEFECTIVE MERCHANDISE

Any customer that receives damaged or defective merchandise should contact Off Road Warehouse immediately and at the latest within 30 days of the Invoice/Purchase date.

Please contact the Customer Service line at 1-800-341-7757 for more information on returning the merchandise to us and how long it will take to receive a replacement.

Off Road Warehouse does its best to make sure that all merchandise is free of defects and is shipped safely but accidents in shipping and transportation as well as manufacturing defects do happen. We will be happy to help you out and get you new merchandise as quickly as possible.

Order Cancelations

Order Cancelations are not guaranteed. Orders are processed once they are received, In some cases these are with third party vendors and manufactors. We will do everything in our power to stop an Order already in motion but sometimes we are unable to do so.

If you request a cancellation, we will confirm the order is canceled prior to issuing a refund. If your order is not able to be canceled, you must follow the Return Policy Guidelines outlined above.

WARNING