JL/JT HD Adjustable Front Track Bar 18+ Wrangler JL/JLU (8875-01)

Jeep Wrangler JL/JT Heavy Duty Adjustable Front Track Bar. Adjustable track bars are used to help center your axles when running a suspension lift. This track bar also significantly improves lateral stiffness over stock, and is seen as a required upgrade to eliminate the factory track bar from contributing to steering shimmy or death wobble, even on stock vehicles.Considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving. Length is adjustable on the vehicle to make adjustments a breeze. Uses maintenance free Synergy Dual Durometer Bushings on both ends. Bent to clear the Synergy Sector Shaft Brace and most aftermarket differential covers.Pair with Synergy's Drag Link, Tie Rod, and Sector Shaft Brace to bullet-proof your steering and guarantee product compatibility from stock height to 3 plus inches of lift.Fits:2018+ Jeep Wrangler JL/JLU2020+ Jeep Gladiator JTBenefits:Eliminates the track bar from contributing to steering shimmy or death wobbleAllows centering of front axle when running a suspension liftAdjustable without removing from vehicleMaintenance Free, no greasing requiredSynergy Dual Durometer Bushings eliminate binding issues associated with stock vulcanized bushingsNo jam nuts that are impossible to keep tightNo modifications required to installIsolates Noise, Vibration, and Harshness (NVH) increasing ride qualityCompatible with Synergy HD Steering and Sector Shaft BraceBent to clear most aftermarket differential coversLimited Lifetime WarrantyFeatures:Made from high quality 1.50 inch x .250 wall DOMRetains factory track bar mounting bolts hardwareSuspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistanceSynergy double adjuster sleeve pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting boltFeatures Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality100 percent bolt on components assures an easy, trouble free installation with the use of basic hand toolsNotes:Compatible from 0-4 inches of lift in the stock mounting locations with no bump stop spacing required. Front track bar relocation bracket and high steer are recommended for lifts 3 inches and over and require 3 inches of bump stop spacingThe replacement adjustable joint is 4812-01 and the replacement bushings are 4327-01Min/max lengths: 33.75 / 34.50 inches