Warrior Products Machined Steel Shims for 2-1/2" Wide Leaf Springs (6 Degrees) (800062)

Re-New Your RIg & SAVE BIG!

$$84.30Lift Kits, Suspension & Shocks \ Suspension components \ Leaf Spring Accessories800062
800062
Machined Steel Shims for 2-1/2" Wide Leaf Springs (6 Degrees) (800062)
Universal - Heavy Duty Machined Steel Leaf Spring Shims for 2-1/2' Wide Leaf Springs (6 Degrees) Correct the pinion and/or caster angles in your leaf sprung Jeep or truck using our heavy-duty Leaf Spring Shims. These shims are designed to be permanently attached to the leaf spring pack using the leafs center-pin. The cross holes are counter-bored ...
Warrior Products4.758Machined Steel Shims for 2-1/2" Wide Leaf Spr

Warrior Products

Machined Steel Shims for 2-1/2" Wide Leaf Springs (6 Degrees) (800062)

$84.30

Item #: 800062

Quantity:
Out of Stock
Add to Cart
Add to Wishlist
  • Create a New List
true
Specifications
UOM
Pair
Finish
Raw
Tariff Code
8709.80.0000
Dimensions (L/W/H)
4 / 4 / 4
Weight
3 lbs
General
Brand
Warrior Products
Item #
800062
UPC
634146800622
MSRP
$84.30
Category
Description
Universal - Heavy Duty Machined Steel Leaf Spring Shims for 2-1/2" Wide Leaf Springs (6 Degrees)
Correct the pinion and/or caster angles in your leaf sprung Jeep or truck using our heavy-duty Leaf Spring Shims. These shims are designed to be permanently attached to the leaf spring pack using the leafs center-pin. The cross holes are counter-bored against the angled surface to ensure the center-pin gets even clamping force across the spread of the pins top surface. Steel construction helps to keep the shims from breaking under heavy load conditions. Together these features create a superior shim that will resist spinning out of place, falling out, or breaking. American-Made from High Quality Steel Counter-bored Cross Hole Accepts 5/16 cross-pin (Not Included) Easily drilled to fit larger pins Available in 2, 4, 6 and 8 angles Available in 2, 2.25", 2.5 and 3 widths NOTE: Some applications may require longer cross-pins (Not Included)
  • 100% US Made
  • Correct the pinion and/or caster angles in your leaf sprung Jeep or truck using our heavy-duty Leaf Spring Shims.
  • These shims are designed to be permanently attached to the leaf spring pack using the leaf's center-pin.
  • The cross holes are counter-bored against the angled surface to ensure the center-pin gets even clamping force across the spread of the pin's top surface.
  • Steel construction helps to keep the shims from breaking under heavy load conditions.
  • Together these features create a superior shim that will resist spinning out of place, falling out, or breaking.
  • Counter-bored Cross Hole.
  • Accepts 5/16" cross-pin (Not Included)
  • Easily drilled to fit larger pins.
  • Available in 2, 4, 6 and 8 angles.
  • Available in 2, 2.25", 2.5" and 3" widths.
  • NOTE: Some applications may require longer cross-pins (Not Included)
DONATE $1 TO KEEP TRAILS OPEN
Customer Reviews
Share your thoughts with other customers
Login to leave a review
Top Reviews
Disappointed with the material choice: steel instead of aluminum
by Valued Customer on September 02, 2020
 
 
 
 
 
Verified Purchase

These are steel not aluminum like alot of the others are.

Was this review helpful to you? yes no
Love the quality!
by Valued Customer on June 10, 2020
 
 
 
 
 
Verified Purchase

Love the quality!

Was this review helpful to you? yes no
Effective lift for improved pinnion angle
by Valued Customer on February 07, 2019
 
 
 
 
 
Verified Purchase

Worked great on my 5.5"" lift for my children corrected most of my pinnion angle

Was this review helpful to you? yes no
Satisfied with the performance and cost-effectiveness
by Valued Customer on June 22, 2015
 
 
 
 
 
Verified Purchase

works great. lifted the jeep yj 4"" and didn't want to spend the money on an SYE so put these under the rear leaf springs. i could have gone probably 7 or 8 degree, but i'm happy with how it's worked so far after over a couple thousand miles.

Was this review helpful to you? yes no
Very satisfied with the quality and craftsmanship
by Valued Customer on May 26, 2015
 
 
 
 
 
Verified Purchase

These are really beefy pieces, the holes were very neatly drilled and centered. I enlarged the holes for a 3/8"" center pin but they were perfect size for stock pins.

Was this review helpful to you? yes no
Solid
by Valued Customer on August 12, 2014
 
 
 
 
 
Verified Purchase

Solid

Was this review helpful to you? yes no
Satisfied with the purchase.
by Valued Customer on May 29, 2014
 
 
 
 
 
Verified Purchase

Perfect. Fit just as they should. Get these instead of aluminum ones. They will last. Need to paint them but that's easy.

Was this review helpful to you? yes no
Impressed with the durability and fit
by Valued Customer on May 05, 2014
 
 
 
 
 
Verified Purchase

If you are installing shims, these are some of the best out there. They will last forever. They do come with a small hole so you may need to drill it, but if your installing shims you should know how to drill a hole in them too. They are a lot more than the chaper aluminum shims, but the cost is worth it.Fits my 4"" lifted '78 Jeep CJ7 like a glove.

Was this review helpful to you? yes no
See more reviews
Return Policy

RETURNS & EXCHANGES

All returns must be accompanied by an original or copy of the receipt within 30 days. There are no refunds/credits after 30 days. Electrical items, tools, installed parts, and some special order items are non-refundable/non-returnable.

All items returned are subject to a minimum 15% restock fee unless other arrangements were made at the time of purchase.

Shipping charges will not be refunded unless item was received damaged or defective, or an error was made on our part when processing your order. Please contact us for any further questions on non-returnable items.

In order to return any products you must contact our customer service at 1-800-341-7757 and obtain an RGA number and write it large and clear on the box being returned. Also care must be taken by you the customer to pack the returned merchandise carefully so that it does not get damaged when sent back to us. Off Road Warehouse is not responsible for any damage that occurs during shipment back to us and the product will become non-returnable if it becomes damaged during the return shipment.

DAMAGED OR DEFECTIVE MERCHANDISE

Any customer that receives damaged or defective merchandise should contact Off Road Warehouse immediately and at the latest within 30 days of the Invoice/Purchase date.

Please contact the Customer Service line at 1-800-341-7757 for more information on returning the merchandise to us and how long it will take to receive a replacement.

Off Road Warehouse does its best to make sure that all merchandise is free of defects and is shipped safely but accidents in shipping and transportation as well as manufacturing defects do happen. We will be happy to help you out and get you new merchandise as quickly as possible.

Order Cancelations

Order Cancelations are not guaranteed. Orders are processed once they are received, In some cases these are with third party vendors and manufactors. We will do everything in our power to stop an Order already in motion but sometimes we are unable to do so.

If you request a cancellation, we will confirm the order is canceled prior to issuing a refund. If your order is not able to be canceled, you must follow the Return Policy Guidelines outlined above.

Where To Buy
Questions & Answers
Be first to ask a question

​​​​​​​
CONTACT US

Toll Free: (800)-341-7757