Good quality easy to install

If your old Tundra needs to be hearded down the road,these bad lads will fix it up tight and quiet as new. Installed with little difficulty with rack on the vehicle.

The urethane bushings were used to replace perfectly good OE soft rubber bushings and they eliminated the understeer that I was experiencing in curves. It was well worth my time and effort to make the change.

Had a shop rebuild the rack and pinion and remove the old bushings. I was able to Install new bushings before installing the rack back into the SUV. Noticable difference going from a 190k mile part to new polyurethane bushings ??

They work and fixed 75% of my steering slop. Save the old washer for the driver side bushing and put it on the front of the bushing then put the bolt through that and put the new washer on the backside that the nut goes over�. The old bushings had a washer built in to the front side� these don't but you can make it all work with the old washer. They are quiet and don't make any noise. My sequoia steers so much better now.

Good quality and fit for the money.

Worked fine. But it was a pain to install. Lasted as long as we had the truck.

I was getting a highway speed steering wheel vibration and had excessive steering wheel play. Both concerns are now gone after replacing the steering rack bushings kit. The kit felt pretty durable. It took me roughly 2.5 hours to install. I had to use a bearing press to install the driver's side bushings. Besides that the installation was a breeze.

Easy to replace and more solid steering feel. Sequoia installation was easier than I thought.

Got these puppies in and they work great!