Like the other review says, take your time. Drill holes first and the exacto knife will be easy.

East install worked well with light bar and pods

Finish is excellent but fit leaves a little to be desired. Not all dashes are the same. If you have speakers like mine (photo) you will need to remove the bottom lip and carefully trim the bottom. This can be done ,but carefully, after trimming it fits perfectly. This was installed on a 2015 Wrangler Sport.

The manufacturer should make the plastic in the cutout sections a little thinner so that it's easier to control cutting tools - take your time, use pilot holes and cut smaller than needed and then trim slowly outwards until you reach the right size for your switches.On the first hole my cuts went a little wonky so the first switch doesn't fit snugly, the others cut perfectly once I learned how to best cut them - it just bothers me that I have to find a way to secure that first switch so that it stays in place. Also, I needed to do a little trimming around the edges to get everything to settle in nicely in the trim in the A-pillar, but I figured that would be the case with an aftermarket piece. Finish wise, it's pretty close to OEM, but not quite. It's not enough to trigger my OCD but it's noticeable.

Easy to install and left plenty of room for my rocker switches. Good fit and match to existing interior. Not a perfect color match but close enough.